If you decide to use an SATA optical drive, make absolutely certain that the drive is certified compatible with your motherboard and that you have drivers compatible with your operating system, especially if you will use the drive as a boot device. We do not recommend using SATA optical drives, because they are plagued with compatibility problems. Serial ATA (SATA) optical drives require the same basic installation steps as standard ATA/ATAPI optical drives, except that SATA drives do not require setting a Master/Slave jumper. If you haven't read the article " Assigning masters and slaves", please do so first. The following sections describe the steps required to install and configure an ATAPI (IDE) optical drive. Internal optical drives are 5.25" half-height devices, and require the same physical installation steps as any other 5.25" externally accessible drive. External optical drives are "installed" simply by connecting them to a USB or FireWire port, as appropriate, and connecting power.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |